Variable Frequency Drives (VFD) - Optidrive E3
Optidrive E3 Specification
We are Dealer, Wholesaler, Supplier, Exporter, Trader of Invertek Drives VFD Drives (Variable Frequency Drives), Optidrive E3, IP20 enclosures, IP66 / NEMA 4X enclosures from Pune, Maharashtra, India.
Size & Weight of IP20
| IP20 | Size 1 | Size 2 | Size 3 | Size 4 | Size 5 |
|---|---|---|---|---|---|
| Height mm (in) | 173 (6.81) | 221 (8.7) | 261 (10.28) | 420 (16.54) | 486 (19.13) |
| Width mm (in) | 83 (3.27) | 110 (4.33) | 131 (5.16) | 171 (6.73) | 222 (8.74) |
| Depth mm (in) | 123 (4.84) | 150 (5.91) | 175 (6.89) | 212 (8.35) | 226 (8.9) |
| Weight kg (lb) | 1 (2.2) | 1.7 (3.75) | 3.2 (7.05) | 9.1 (20.06) | 18.1 (39.9) |
| Fixings | 4 × M5 | 4 × M5 | 4 × M5 | 4 × M8 | 4 × M8 |
| Packaged Height mm (in) | 165 (6.5) | 234 (9.21) | 254 (10) | 340 (13.39) | 356 (14.02) |
| Packaged Width mm (in) | 125 (4.92) | 144 (5.67) | 162 (6.38) | 282 (11.1) | 336 (13.23) |
| Packaged Depth mm (in) | 235 (9.25) | 260 (10.24) | 315 (12.4) | 560 (22.05) | 658 (25.91) |
| Packaged Weight kg (lb) | 1.2 (2.65) | 1.9 (4.19) | 3.5 (7.72) | 10.5 (23.15) | 19 (41.89) |
Size & Weight of IP66 Outdoor
| IP66 Outdoor | Size 1 | Size 2 | Size 3 | Size 4 |
|---|---|---|---|---|
| Height mm (in) | 232 (9.13) | 257 (10.12) | 310 (12.2) | 360 (14.17) |
| Width mm (in) | 161 (6.34) | 188 (7.4) | 211 (8.31) | 240 (9.45) |
| Depth mm (in) | 162 (6.38) | 182 (7.17) | 235 (9.25) | 271 (10.67) |
| Weight kg (lb) | 2.3 (5.07) | 3.5 (7.72) | 6.6 (14.55) | 9.5 (20.94) |
| Fixings | 4 × M4 | 4 × M4 | 4 × M4 | 4 × M4 |
| Packaged Height mm (in) | 205 (8.07) | 215 (8.46) | 305 (12.01) | 325 (12.8) |
| Packaged Width mm (in) | 210 (8.27) | 235 (9.25) | 270 (10.63) | 295 (11.61) |
| Packaged Depth mm (in) | 345 (13.58) | 375 (14.76) | 440 (17.32) | 425 (16.73) |
| Packaged Weight kg (lb) | 2.9 (6.39) | 4.2 (9.26) | 7.6 (16.76) | 11.5 (25.35) |
Technical Specifications
| Section | Subsection | Specification |
|---|---|---|
| Input Ratings | Supply Voltage | 100–115V ±10% 200–240V ±10% 380–480V ±10% |
| Supply Frequency | 48–62Hz | |
| Displacement Power Factor | > 0.98 | |
| Phase Imbalance | 3% Maximum allowed | |
| Inrush Current | < rated current | |
| Power Cycles | 120 per hour maximum, evenly spaced | |
| Output Ratings | Output Power | 110V 1 Ph: 0.5–1.5HP 230V 1 Ph: 0.37–4kW 230V 3 Ph: 0.37–18.5kW 400V 3 Ph: 0.75–37kW 460V 3 Ph: 1–50HP |
| Overload Capacity | 150% for 60 Seconds 175% for 2.5 Seconds |
|
| Output Frequency | 0–500Hz, 0.1Hz resolution | |
| Typical Efficiency | > 98% | |
| Ambient Conditions | Temperature | Storage: −40 to 60°C Operating: IP20: −10 to 50°C, IP66: −20 to 40°C Derated: −20 to 50°C |
| Altitude | Up to 1000m without derating 2000m max UL approved 4000m max (non UL) |
|
| Humidity | 95% Max, non-condensing | |
| Vibration | Conforms to EN61800-5-1 | |
| Enclosure | Ingress Protection | IP20, IP66 |
| Programming | Keypad | Built-in keypad Optional remote mountable keypad |
| Display | 7 Segment LED | |
| PC | OptiTools Studio | |
| Control Specification | Control Method | Sensorless Vector PM Vector Control BLDC Control Synchronous Reluctance |
| PWM Frequency | 4 – 32kHz Effective | |
| Stopping Mode | Ramp to stop: 0.1 – 600 secs Coast to stop |
|
| Braking | Motor Flux Braking Built-in transistor (except frame size 1) |
|
| Skip Frequency | Single point, user adjustable | |
| Setpoint Control | Analog Signal | 0–10V, 10–0V 0–20mA, 20–0mA 4–20mA, 20–4mA |
| Digital | Motorised Potentiometer Modbus RTU CANopen |
|
| Fieldbus | CANopen | 125–1000 kbps |
| Modbus RTU | 9.6–115.2 kbps selectable | |
| I/O Specification | Power Supply | 24V DC, 100mA (Short Circuit Protected) 10V DC, 10mA (Potentiometer) |
| Programmable Inputs | 4 Total: 2 Digital, 2 Analog/Digital | |
| Digital Inputs | 8–30V DC, Internal/External Supply Response Time < 4ms |
|
| Analog Inputs | 12-bit Resolution < 4ms Response Time ± 2% Accuracy |
|
| Programmable Outputs | 2 Total: 1 Analog/Digital, 1 Relay | |
| Relay Outputs | 250V AC, 30V DC Max 6A AC, 5A DC |
|
| Analog Outputs | 0–10V | |
| Application Features | PI Control | Internal PI Controller Standby/Sleep Function |
| Fire Mode | Bidirectional Selectable Speed Setpoint |
|
| Maintenance & Diagnostics | Fault Memory | Last 4 Trips with Timestamp |
| Data Logging | Prior to trip data: Output Current Drive Temperature DC Bus Voltage |
|
| Monitoring | Hours Run Meter | |
| Standards Compliance | Low Voltage Directive | Adjustable speed drives – EMC requirements |
| EMC Directive | 2014/30/EU Cat C1 EN61800-3:2004 |
|
| Machinery Directive | 2006/42/EC | |
| Conformance | CE, UL, RCM | |
| Environmental | IP20: Class 3C2, 3S2 (IEC60721-3) IP66: Class 3C3, 3S3 (IEC60721-3) |